PocketWizard Anschlusskabel 30 cm, Miniphone 2.5 mm (m) auf Elinchrome (m)

Synchrokabel zur Auslösung eines Elichrom Blitzgerätes mit einem PocketWizard Transceiver

Geht für:
Elinchrom Digital RX Series
Elinchrom Digital Style Series
Elinchrom Style S Series
Elinchrom Micro AS packs
Elinchrom Ranger Series
Elinchrom Classic packs

Description:  This cable contains a pre-trigger switch.  When enabled, the camera behaves as if the camera's shutter release button were held half-pressed continuously. This makes the camera respond more quickly and consistently, but also consumes the camera's batteries much more quickly. When disabled, this cable functions identically to the N-MCDC2.
This –P cable works with most PocketWizard radios. This pre-trigger cable has a switch that allows you to toggle half-press on or off at the camera position, but not remotely.
A standard cable works with most PocketWizard radios but has no half-press control, and is for basic remote triggering only.
A –ACC cable allows a compatible PocketWizard radio to independently control both half-press and full-press functions, as well as relay E-TTL signals to compatible flashes when using FlexTT5s.
 
Compatible with the following radios:
Plus II: Use this cable to remotely fire your camera.
Plus III : This cable can remotely fire your camera and control half-press function at the camera’s position.  Use a –ACC cable for best results and to have half-press capability from the transmitting radio.
MultiMAX with no –ACC port:  Use this cable to remotely fire your camera and control half-press function at the camera’s position.
MultiMAX with –ACC port: This cable can remotely fire your camera but cannot wake up the camera in a remote zone.  Use a –ACC cable for best results
FlexTT5:  This cable can remotely fire your camera and control half-press function at the camera’s position, but your remote camera will not be able to relay an E-TTL signal to Speedlites.  Use a –ACC cable for best results.  Learn more here
Compatible with cameras using Nikons MC-DC2 remote terminal including:
 Nikon         
 D7100               D750
 D7000        D610
 D5300        D600
 D5200        D90
 D5100        Df
 D3300         
 D3200         
 D3100         
Not for Nikon D70s or D80-use NM4-P instead.